top of page
  • Janet Ferrao

Eppendorf 5810/5804/5810R/5804R Lid Gas Spring installation

Updated: Aug 8, 2023

Remove back panel

This provides access to the bottom of the pressure damper.

Pry with a tool with a hooked edge to remove the clamp.

Slide the clamp to the side to allow the Lid Spring to be released

Now open the centrifuge lid and do the same on the top side

Remove clamp

Slide it out to release

Now install in reverse.

1,276 views0 comments

Recent Posts

See All


bottom of page